SOLUTION: what should be the chlorine dose of a water that has a chlorine demand of 2.4 mg/L if a residual of 0.4 mg/L is desired?
Algebra.Com
Question 719253: what should be the chlorine dose of a water that has a chlorine demand of 2.4 mg/L if a residual of 0.4 mg/L is desired?
Answer by solver91311(24713) (Show Source): You can put this solution on YOUR website!
Please ask your Chemistry questions on a chemistry homework help site.
John

Egw to Beta kai to Sigma
My calculator said it, I believe it, that settles it
RELATED QUESTIONS
1) how many litres of 12% sodium hypochlorite solution are needed to make 100 litres of... (answered by KMST)
Which of the following is an acceptable level of chlorine residual at the far reaches of... (answered by stanbon)
how many pounds of chlorine are needed to disinfect 100,000 gallons of water in a water... (answered by solver91311)
what should be the setting on a chlorinator if a pump usually delivers approximatly 700... (answered by solver91311)
A ten-inch diameter water main 500 feet long needs to be disinfected.an initial chlorine... (answered by solver91311)
if a hypochlorinator is set at a pumping rate of 50 gallons per minute and uses a 5%... (answered by solver91311)
how many gallons of 12% sodium hypochlorite solution will be needed to disinfect a... (answered by solver91311)
how many gallons of a sodium hypochlorite solution containing 5% available chlorine... (answered by solver91311)
What should be the setting on a chlorinator if a pump usually delivers approximately 700... (answered by Alan3354)