SOLUTION: You want too make a 65 angle by marking an arc on the perimeter of a 14-in diameter disk and drawing lines from the ends of the arc to the disks center. How long should the arc be?

Question 986338: You want too make a 65 angle by marking an arc on the perimeter of a 14-in diameter disk and drawing lines from the ends of the arc to the disks center. How long should the arc be?
Answer by Alan3354(69443) (Show Source): You can put this solution on YOUR website!
You want too make a 65 angle by marking an arc on the perimeter of a 14-in diameter disk and drawing lines from the ends of the arc to the disks center. How long should the arc be?
-----------------
arc = pi*d*(angle/360)
= pi*14*65/360 inches
RELATED QUESTIONS
Imagine I wrap sheet metal part way around a tube leaving two parallel sides connected by (answered by ikleyn,BM22222)

mr. bloop is rolling small steal disks down a ramp. each disk is 4cm in diameter and 5mm... (answered by jorel1380)

Teddy watched a spider crawl through an arc of 54 degree on a disk radius 10 in. How far... (answered by MathLover1,MathTherapy)

A central angle intercepts an arc on a circle equal in length to the diameter of a... (answered by josmiceli)

A park maintenance person stands 16m from a circular monument. If you assume her lines of (answered by Alan3354)

Find the number of radians in the central angle that subtends an arc of 6cm on a circle... (answered by josgarithmetic,ikleyn)

Find the number of radians in the central angle that subtends an arc of 6m on a circle... (answered by Theo,MathTherapy)

A 6-foot-diameter disk and an 18-foot-diameter disk sit side by side. Determine the... (answered by venugopalramana)

an arc is 0.04 meters long and is intercepted by a central angle of circumfrence/8... (answered by stanbon)