SOLUTION: The problem goes as follows: Two metal balls are placed in a cylinder containing water. The lower has a radius of 7cm and the upper has a radius of 3cm. The diameter of the cylinde

Question 1125926: The problem goes as follows: Two metal balls are placed in a cylinder containing water. The lower has a radius of 7cm and the upper has a radius of 3cm. The diameter of the cylinder is 18cm. The total volume of water in the cylinder is 2414/3 x Pi cm3. The volume of water that has to be poured out so that there is just enough water to cover both balls?
Found 2 solutions by josgarithmetic, ikleyn:
Answer by josgarithmetic(39617)   (Show Source): You can put this solution on YOUR website!

Answer by ikleyn(52777)   (Show Source): You can put this solution on YOUR website!
.

          It is very good problem for someone who wants to check how creative is his (or her) mind in solving problems
          in Math and Physics.

There are two basic stable configurations for the spherical balls in this cylinder.

One configuration is shown in the Figure on the right. The larger ball lies at the bottom of the cylinder and touches the cylinder's vertical lateral surface.    The smaller ball is above the bottom. It touches the larger ball and also touches vertical lateral surface of the cylinder. The Figure shows a vertical section of the cylinder and the two balls by that existing and unique vertical plane which contains the cylinder's vertical axis and the centers of the two balls. In the Figure, you see a right angled triangle shown in red. The hypotenuse of this triangle is the segment AB connecting the centers of balls. This segment goes through the tangent point, and its length is 7 + 3 = 10 cm. You can easily find the horizontal leg of this triangle, x. From the equation 7 + x + 3 = 18 you have x = 18 - 7 - 3 = 8.

Then the vertical leg of this triangle is = = 6 cm. Thus the height of the highest point of the small ball over the cylinder bottom is 7 + 6 + 3 = 16 centimeters. It defines the minimal required upper level of 16 cm of the water in the cylinder after submerging the balls. With it, the volume equation is = W + + , or W = - = = = where W is the minimal required volume of the water before submerging the balls. Now, how much of water has to be poured out so that there is just enough water to cover both balls? - It is the difference cm^3 MINUS cm^3 = cm^3 = cm^3. ANSWER

The other stable configuration is when the small ball lies on the bottom, while the larger ball leans on it.
The analysis is very similar in this case.

            ****************
             * * * Solved * * *
            ****************

RELATED QUESTIONS
The problem goes as follows: Two metal balls are placed in a cylinder containing water.... (answered by josgarithmetic)
Two metal balls are placed in a cylinder containing water. The lower ball has a radius of (answered by ikleyn)
Two metal balls are placed in a cylinder containing water. The Lower ball has a radius of (answered by ikleyn)
a metal sphere with a volume of 900cm cubed is placed in a cylinder with a radius of 10cm (answered by lwsshak3)
A cylinder of radius of 10cm. It already contains water to depth of 15cm. A metal sphere... (answered by lynnlo)
A cylinder of radius of 10cm. It already contains water to depth of 15cm. A metal sphere... (answered by ankor@dixie-net.com)
A heavy metal sphere with radius 10cm is dropped into a right circular cylinder with base (answered by Mathtut)
A heavy metal sphere with radius 10 cm is dropped into a right circular cylinder with... (answered by vleith,RAY100)
. A heavy metal sphere with radius 10 cm is dropped into a right circular cylinder with... (answered by solver91311)