SOLUTION: A cylindrical tank is subjected to a maximum pressure of 5 MPa. The inside diameter is 1100 mm while the riveted joint has a longitudinal pitch of 40 mm and there are two straps p
Algebra.Com
Question 1170243: A cylindrical tank is subjected to a maximum pressure of 5 MPa. The inside diameter is 1100 mm while the riveted joint has a longitudinal pitch of 40 mm and there are two straps placed. The design stress for the plate and the rivets are 150 N/mm² and 190 N/mm², respectively. Determine the thickness of the plate. Assume 70% efficiency of the joints.
Please show the solution
Answer by ikleyn(52787) (Show Source): You can put this solution on YOUR website!
.
Hey,
it is just not a school Math and even not a school Physics.
It is just Mechanical Engineering University course.
I think that you chose wrong site to post your problem here.
It is not a specialization and not a profile of this forum.
RELATED QUESTIONS
A steel pipe 1 m in diameter is required to carry an internal pressure of 750 kPa, if the (answered by CPhill)
What is the surface area of a cylindrical ring if its outside diameter is 16 mm and its... (answered by dabanfield)
A cylindrical water tank has an inside diameter of 18 inches. The tank is 6 feet high.... (answered by Alan3354)
A horizontal cylindrical tank has an inside diameter of 5 ft. and an inside length of 18... (answered by ewatrrr)
A horizontal cylindrical tank has an inside diameter of 5 ft. and an inside length of 18... (answered by ewatrrr)
a spherical ball having a diameter of 60cm is placed on a cylindrical tank which cotains (answered by Fombitz)
a 5 cubic meter cylindrical tank is to be constructed.If it has a diameter of 1.5 meter,... (answered by Cromlix)
a 5 cubic meter cylindrical water tank is to be constructed. if it has a diameter of 1.5... (answered by Cromlix)
The fracture strength of a certain type of manufactured glass is normally distributed... (answered by stanbon)