SOLUTION: An axial load of 100 kN is applied to a flat bar 20 mm thick, tapering in width from 120 mm to 40 mm in a length of 10 m. Assuming E = 200 GPa, determine the total elongation of th

Question 1192377: An axial load of 100 kN is applied to a flat bar 20 mm thick, tapering in width from 120 mm to 40 mm in a length of 10 m. Assuming E = 200 GPa, determine the total elongation of the bar.
Answer by ikleyn(52781) (Show Source): You can put this solution on YOUR website!
.

Find the full solution to the problem in this source

http://web.ncyu.edu.tw/~lanjc/lesson/C3/class/Chap02-A.pdf

(Sample Problem 2.2) with full explanations and nice illustration.

Slide 23 of 64.

RELATED QUESTIONS
What set of side lengths does not form a right triangle? A.) 11 mm, 24 mm, 26 mm B.)... (answered by Alan3354)

A solid aluminum shaft of 100 mm diameter fits concentrically in a hollow steel tube.... (answered by ikleyn)

Autimotive Trades - A hose must fit over a cylindrical opening 57.2 mm in diameter. If... (answered by edjones)

A Coin 10 MM In Diameter Is 2 MM Thick Calculate The Volume Of Metal IN The Coin Take... (answered by Boreal)

An elastic member 20 mm thick is glued in between two rigid members. Considering a shear... (answered by ikleyn)

The length of the rectangle is 10 mm longer than its width. Its perimeter is more than 80 (answered by Boreal)

li is rolling quarters. each coin is 1.75 mm thick what is the length of a $10 roll of... (answered by josmiceli)

The lengths of two sides of a triangle are 20 mm and 13 mm. Which of these lengths cannot (answered by KMST)

How much lead is needed to coat a cable, 55 mm in diameter, if the cable is 5 km long... (answered by josgarithmetic)