SOLUTION: The height of a right circular cone is 24 inches and the radius of the base is 6 inches. A cylindrical hole of diameter 4 inches is drilled through the cone so that the point of th

Algebra.Com
Question 959400: The height of a right circular cone is 24 inches and the radius of the base is 6 inches. A cylindrical hole of diameter 4 inches is drilled through the cone so that the point of the drill follows the altitude of the cone. Determine the volume of the solid region that remains.
Answer by josgarithmetic(39618)   (Show Source): You can put this solution on YOUR website!
watch for the ratio between the height and the radius. The diameter of the hole is 4 inches so the radius of the hole is 2 inches. The conical portion removed in the hole drilling is a height of inches heightl The volume is . A purely cylindrical portion below this conical space is of volume . The total space removed in the drilling is .

New volume is original volume minus drilled-out volume.
.
That is so you can understand. Simplify from that.

(should be better now)

RELATED QUESTIONS

What is the surface area of a right circular cylindrical oil can, if the radius of its... (answered by macston)
A right circular cone has a radius of 6 inches and a volume of 180 cubic inches. What is (answered by mananth)
a right circular cone has a radius of 6 inches and a volume of 180pi cubic inches what is (answered by jim_thompson5910)
What is the volume, in cubic inches, of a right circular cone with a diameter of 6 inches (answered by Alan3354)
The formula for the slant height of a right circular cone is s = r^2 + h^2, where r is... (answered by addingup)
A hole 10 cm in diameter is to be punched out from a right circular cone (base on top)... (answered by greenestamps)
The total surface area of a right circular cone is one and one-half times the lateral... (answered by MathLover1,ikleyn)
The total surface area of a right circular cone is one and one-half times the lateral... (answered by mananth)
What is the surface area of a right circular cylindrical oil can, if the radius of its... (answered by Alan3354,macston)