SOLUTION: A rectangular piece of stainless steel sheet metal measures 8 meters by 10 meters. if we are to take an open-top tank by cutting equal squares from each corner, folding up the tabs

Question 1171508: A rectangular piece of stainless steel sheet metal measures 8 meters by 10 meters. if we are to take an open-top tank by cutting equal squares from each corner, folding up the tabs by 90 degrees, and welding the vertical edges; what size should the squares be cut to have the container hold 48 cubic meters?
Found 2 solutions by josgarithmetic, Boreal:
Answer by josgarithmetic(39617) (Show Source): You can put this solution on YOUR website!
Edge length of each cut square, x.

Base area,
and height of box is x.

.
.
.

.
.
Answer by Boreal(15235) (Show Source): You can put this solution on YOUR website!
Draw this.
the width will be 8-2x, where x is how much is cut in meters
the length will be 10-2x
the height will be x
the volume is x(80-36x+4x^2)=48
or 4x^3-36x^2+80x-48=0
or x^3-9x^2+20x-12=0
/1== -9== 20== -12
1--- -8---12----0 so the factors are (x-1)(x^2-8x+12)=(x-1)(x-6)(x-2)
the graph shows x=1,2,6, as well. The last is too large and leads to negative values
1 meter on each side would give dimensions of 8*6*1. And 2 meters on each side 4*6*2. Both of these would give 48 m^2.

RELATED QUESTIONS
An open metal chemical tank is to be made from a rectangular piece of stainless steel... (answered by scott8148)
Please help me solve the word problem using The Rational Zero Theorem An open metal... (answered by Theo)
Squares with sides of length x are cut from the corners of a rectangular piece of sheet... (answered by Theo)
An open box, without a top is to be made by cutting a congruent squares from each corner (answered by josgarithmetic,ikleyn)
A rectangular tank with a square base, an open top, and a volume of 13,500 ft3 is to be... (answered by josgarithmetic,ikleyn)
An open Box is to be constructed from a square piece of sheet metal by removing a square... (answered by josgarithmetic)
A box is to be formed from a rectangular piece of sheet metal by cutting squares... (answered by longjonsilver)
An open box is to be constructed from a rectangular sheet of metal by removing a one-foot (answered by ankor@dixie-net.com)
Dimensions of a piece of sheet metal. A rectangular piece of sheet metal is 4 inches less (answered by josgarithmetic,ikleyn)