SOLUTION: Please help me
1. A heater takes 14 A from a 230V supply. What current will it take if the voltage increases to 250V.
2. The 14 cm pulley on a main shaft revolves at a rate of 17
Algebra.Com
Question 1054735: Please help me
1. A heater takes 14 A from a 230V supply. What current will it take if the voltage increases to 250V.
2. The 14 cm pulley on a main shaft revolves at a rate of 175rpm and belted to an 8cm pulley on the counter shaft. Find the speed of the counter shaft.
Answer by Fombitz(32388) (Show Source): You can put this solution on YOUR website!
14 is to 230 as I is to 250
.
.
RELATED QUESTIONS
if it take 2 men 8 hours to install a water heater what would be the total man... (answered by josmiceli)
A heater raises the temperature 15 degrees in 24 minutes.
With a second heater also in... (answered by josgarithmetic)
Heater A warms a room from 40 degrees to 70 degrees in 5 hours. Heater B can do this job... (answered by josgarithmetic)
Can you please help me with this question: the voltage needed to produce a current of 8 A (answered by scott8148)
If the primary to secondary voltage ratio is 4:1 for a transformer, what is the secondary (answered by KMST)
I need reverse this equation to solve for A or B or A and B in order to find the voltage... (answered by KMST)
A 10Ω and a 20Ω resistances are connected in parallel, another resistance of... (answered by Alan3354)
I have a bad time with word problems. Please help me with this:
Junior's boat will go (answered by Greenfinch,richwmiller)
Hi the chapter im on is called Exponential and Logarithmic functions. I had a question... (answered by stanbon,josmiceli)