SOLUTION: The sketch shows a component made from Sem square bar and Sem diameter rod The density of steel is g per cubic centimetre . For shipping purposes the components are packed into ind

Question 1195537: The sketch shows a component made from Sem square bar and Sem diameter rod The density of steel is g per cubic centimetre . For shipping purposes the components are packed into individual boxes before being packed into shipping crates measuring approximately 0.25m x 0.3m x 0.4m Shipping crates are packed on pallets to a maximum weight of 800 Kg
Found 2 solutions by greenestamps, ikleyn:
Answer by greenestamps(13200)   (Show Source): You can put this solution on YOUR website!

(1) The number of gm/cc for the density of steel does not show up in your post.

(2) You did not ask a question....

Re-post

Answer by ikleyn(52803)   (Show Source): You can put this solution on YOUR website!
.
The sketch shows a component made from Sem square bar and Sem diameter rod
The density of steel is g per cubic centimetre . For shipping purposes
the components are packed into individual boxes before being packed into
shipping crates measuring approximately 0.25m x 0.3m x 0.4m
Shipping crates are packed on pallets to a maximum weight of 800 Kg
~~~~~~~~~~~~~~~~

After reading this post, I became interested what is " Sem square bar " and what is " Sem diameter rod ".

        I never saw such terms in English and began to worry about it . . .

I made my small research in the Internet - - - I simply found this problem in another web-site,
and found out that " Sem square bar " is actually " 5cm square bar ",
while " Sem diameter rod " is " 5cm diameter rod".

After that, everything fell into place in my mind and in my understanding
on who our visitors are, how do they work, how do they write, how do they understand what they do
and how do they care about what they do.

It is the same as to visit an old circus with horses and clowns.

Now, I'm not surprised more.

///////////////////

To the managers of this project:

            PLEASE remove the person, who submitted this post, from his (or her) position at the project

            for his total inability to write correctly and to provide a proper input.

RELATED QUESTIONS
A square steel bar is equal in area to a 5" diameter steel rod. Determine side of the... (answered by Alan3354,josmiceli)
A steel reinforcing rod is 15' long and 9/16" thick at its diameter. If a cubic foot of... (answered by checkley77)
The ideal diameter of a steel reinforcement rod is 2.8cm. The actual diameter may vary... (answered by Fombitz)
Steel bar having a rectangular cross section 15mmx20mm and 11 m long is suspended... (answered by ikleyn)
The price of a steel rod varies jointly as the length and the square of the diameter. If... (answered by algebra hello)
The ideal diameter of a steel reienforcement rod is 2.8 cm the actual diameter may vary... (answered by edjones)
The sketch above shows a component which is stamped out of sheet steel. The square in the (answered by greenestamps)
The density of steel is approximately 7.8 grams per cubic centimeter. An empty steel can... (answered by josgarithmetic,ikleyn)
find the number of steel ball bearings, each of diameter .7cm, that can be made from 1 kg (answered by Alan3354)