SOLUTION: Calculate the diameter of the table cloth, if it must just touch the floor. Original diameter on top of the table is 1,1m and the height of the table is 550mm.

Question 1083336: Calculate the diameter of the table cloth, if it must just touch the floor. Original diameter on top of the table is 1,1m and the height of the table is 550mm.
Answer by Theo(13342) (Show Source): You can put this solution on YOUR website!
diameter of the table cloth on top of the table is 1.1 meters.
height of the table is 550 milli-meters.
550 millimeters is equal to .55 meters.

this means you need to add .55 meters to the diameter of the table cloth on both ends.

the diameter of the table cloth is therefore equal to 1.1 meters + 1.1 meters = 2.2 meters.

that's what i think.

RELATED QUESTIONS
Find the area of a cloth required to cover a circular table top if the diameter of the... (answered by ankor@dixie-net.com)

I am trying to help my daughter. Bailey bought a circular table cloth for her kitchen. It (answered by richwmiller)

what is the geometric term of a table... (answered by Alan3354)

the area of the table cloth is 16 square feet. Approximately how long is each side of the (answered by richwmiller)

If I wanted to varnish the top of the table before putting the cloth on, what area would... (answered by Alan3354)

A rectangular table is 45 inches wide and 64 inches long.A table cloth hangs over the 10... (answered by stanbon)

what is the geometric concept suggested by each. 1.pencil 2.beam of light 3.edge of a... (answered by KMST)

Ellie bought a circular etched-glass table top to use as her dining room table. The glass (answered by mananth)

to trim the edges of a rectangle table cloth, 66ft. of lace is needed. The lenght of the (answered by rfer)