SOLUTION: A 6000 lb SUV is being winched up a ramp onto a flatbed trailer. If the ramp is at a 25 degree angle, how much force will be required by the winch to pull the SUV up the ramp?

Question 117104: A 6000 lb SUV is being winched up a ramp onto a flatbed trailer. If the ramp is at a 25 degree angle, how much force will be required by the winch to pull the SUV up the ramp?
Answer by bucky(2189) (Show Source): You can put this solution on YOUR website!
This was previously answered as the posting to problem 117069 (answer 85147). To save you the
trouble of looking that answer up, here it is again:
.
In this forum it's pretty hard to do drawings that support geometric problems such as this one.
.
So, let's just say that for a weight on a ramp that goes up at an angle the
portion of the weight W that acts perpendicular to the ramp is given by the equation:
.

.
and the portion of the weight W that acts parallel to and down the ramp is given by the
equation:
.

.
In this problem, the weight W is the weight of the SUV which is given as 6000 lbs and the
angle of the ramp is 25 degrees.
.
The winch will have to generate enough force to overcome the portion of the weight of the
SUV that acts parallel to and down the ramp. [This assumes the rolling friction of the vehicle
is negligible.] So the winch will have to produce an amount of force equal to:
.

.
Once the vehicle is in motion the winch will have to pull with a force of 2535.71 lbs
parallel to the ramp to keep the SUV rolling up the ramp at a steady rate of movement.
.
Hope this helps you to understand the problem a little better. If you expect to do many of
these problems, you might want to memorize these two "ramp" equations.
.

RELATED QUESTIONS
A 6000 lb suv is being winched up a ramp onto a flat bed trailer. If the ramp is at a 25... (answered by bucky)

A boat is winched up a ramp on a cable that winds around a 6" diameter drum. What total... (answered by Alan3354)

A force of 80 pounds on a rope is used to pull a box up a ramp inclined at from the... (answered by solver91311)

A ramp at the loading dock of a factory makes a 13 degree angle with the ground. If the... (answered by greenestamps)

10. A wheelchair ramp is being designed for a remodeling project. The ramp must connect... (answered by josmiceli)

if a 225 pound box is resting on a sloping ramp, two forces are "at work" on the box as a (answered by ikleyn)

A conveyor ramp carries heavy equipment up to an elevated platform. If the ramp starts at (answered by ankor@dixie-net.com)

A box weighing 543 N is at rest on a ramp at an angle of 15o with the horizontal. The... (answered by Fombitz)

A box weighing 543 N is at rest on a ramp at an angle of 15 with the horizontal. The... (answered by Fombitz)