SOLUTION: Graph the following lines, you may use whichever method. 1. y=x-2 2. y=-2x+5 3. y=-x-2 4. y=5/3x-4 5. y=2x 6. y=-1/2x+3

Question 922877: Graph the following lines, you may use whichever method.
1. y=x-2
2. y=-2x+5
3. y=-x-2
4. y=5/3x-4
5. y=2x
6. y=-1/2x+3
Answer by MathLover1(20849) (Show Source): You can put this solution on YOUR website!
1.

Solved by pluggable solver: Graphing Linear Equations

In order to graph we only need to plug in two points to draw the line

So lets plug in some points

Plug in x=-7

Multiply

Add

So here's one point (-7,-9)

Now lets find another point

Plug in x=-6

Multiply

Add

So here's another point (-6,-8). Add this to our graph

Now draw a line through these points

So this is the graph of through the points (-7,-9) and (-6,-8)

So from the graph we can see that the slope is (which tells us that in order to go from point to point we have to start at one point and go up 1 units and to the right 1 units to get to the next point) the y-intercept is (0,)and the x-intercept is (,0)

We could graph this equation another way. Since this tells us that the y-intercept (the point where the graph intersects with the y-axis) is (0,).

So we have one point (0,)

Now since the slope is , this means that in order to go from point to point we can use the slope to do so. So starting at (0,), we can go up 1 units

and to the right 1 units to get to our next point

Now draw a line through those points to graph

So this is the graph of through the points (0,-2) and (1,-1)

Solved by pluggable solver: Graphing Linear Equations

In order to graph we only need to plug in two points to draw the line

So lets plug in some points

Plug in x=-2

Multiply

Add

So here's one point (-2,9)

Now lets find another point

Plug in x=-1

Multiply

Add

So here's another point (-1,7). Add this to our graph

Now draw a line through these points

So this is the graph of through the points (-2,9) and (-1,7)

So from the graph we can see that the slope is (which tells us that in order to go from point to point we have to start at one point and go down -2 units and to the right 1 units to get to the next point), the y-intercept is (0,)and the x-intercept is (,0) ,or (,0)

We could graph this equation another way. Since this tells us that the y-intercept (the point where the graph intersects with the y-axis) is (0,).

So we have one point (0,)

Now since the slope is , this means that in order to go from point to point we can use the slope to do so. So starting at (0,), we can go down 2 units

and to the right 1 units to get to our next point

Now draw a line through those points to graph

So this is the graph of through the points (0,5) and (1,3)

Solved by pluggable solver: Graphing Linear Equations

In order to graph we only need to plug in two points to draw the line

So lets plug in some points

Plug in x=-9

Multiply

Add

So here's one point (-9,7)

Now lets find another point

Plug in x=-8

Multiply

Add

So here's another point (-8,6). Add this to our graph

Now draw a line through these points

So this is the graph of through the points (-9,7) and (-8,6)

So from the graph we can see that the slope is (which tells us that in order to go from point to point we have to start at one point and go down -1 units and to the right 1 units to get to the next point), the y-intercept is (0,)and the x-intercept is (,0)

We could graph this equation another way. Since this tells us that the y-intercept (the point where the graph intersects with the y-axis) is (0,).

So we have one point (0,)

Now since the slope is , this means that in order to go from point to point we can use the slope to do so. So starting at (0,), we can go down 1 units

and to the right 1 units to get to our next point

Now draw a line through those points to graph

So this is the graph of through the points (0,-2) and (1,-3)

Solved by pluggable solver: Graphing Linear Equations

In order to graph we only need to plug in two points to draw the line

So lets plug in some points

Plug in x=-3

Multiply

Add

Reduce

So here's one point (-3,-9)

Now lets find another point

Plug in x=0

Multiply

Add

Reduce

So here's another point (0,-4). Add this to our graph

Now draw a line through these points

So this is the graph of through the points (-3,-9) and (0,-4)

So from the graph we can see that the slope is (which tells us that in order to go from point to point we have to start at one point and go up 5 units and to the right 3 units to get to the next point) the y-intercept is (0,)and the x-intercept is (,0) ,or (,0)

We could graph this equation another way. Since this tells us that the y-intercept (the point where the graph intersects with the y-axis) is (0,).

So we have one point (0,)

Now since the slope is , this means that in order to go from point to point we can use the slope to do so. So starting at (0,), we can go up 5 units

and to the right 3 units to get to our next point

Now draw a line through those points to graph

So this is the graph of through the points (0,-4) and (3,1)

Solved by pluggable solver: Graphing Linear Equations

In order to graph we only need to plug in two points to draw the line

So lets plug in some points

Plug in x=-4

Multiply

Add

So here's one point (-4,-8)

Now lets find another point

Plug in x=-3

Multiply

Add

So here's another point (-3,-6). Add this to our graph

Now draw a line through these points

So this is the graph of through the points (-4,-8) and (-3,-6)

So from the graph we can see that the slope is (which tells us that in order to go from point to point we have to start at one point and go up 2 units and to the right 1 units to get to the next point) the y-intercept is (0,)and the x-intercept is (,0)

We could graph this equation another way. Since this tells us that the y-intercept (the point where the graph intersects with the y-axis) is (0,).

So we have one point (0,)

Now since the slope is , this means that in order to go from point to point we can use the slope to do so. So starting at (0,), we can go up 2 units

and to the right 1 units to get to our next point

Now draw a line through those points to graph

So this is the graph of through the points (0,0) and (1,2)

Solved by pluggable solver: Graphing Linear Equations

In order to graph we only need to plug in two points to draw the line

So lets plug in some points

Plug in x=-8

Multiply

Add

Reduce

So here's one point (-8,7)

Now lets find another point

Plug in x=-6

Multiply

Add

Reduce

So here's another point (-6,6). Add this to our graph

Now draw a line through these points

So this is the graph of through the points (-8,7) and (-6,6)

So from the graph we can see that the slope is (which tells us that in order to go from point to point we have to start at one point and go down -1 units and to the right 2 units to get to the next point), the y-intercept is (0,)and the x-intercept is (,0)

We could graph this equation another way. Since this tells us that the y-intercept (the point where the graph intersects with the y-axis) is (0,).

So we have one point (0,)

Now since the slope is , this means that in order to go from point to point we can use the slope to do so. So starting at (0,), we can go down 1 units

and to the right 2 units to get to our next point

Now draw a line through those points to graph

So this is the graph of through the points (0,3) and (2,2)

RELATED QUESTIONS
PLEASE HELP ME!!!!!! :((( Find the solution of the following system of equations by... (answered by jim_thompson5910)

use the subsitution method to solve the linear systems. 1) y=x+3 3x-y=5 2) 4x+y=9 (answered by lynnlo)

1. Graph y = 3x � 5 2. Graph 3x + 2 = 5x - y 3. Graph y = |x| - 2 4. Graph the 2... (answered by jojo14344)

Please place the following equations into y= 1.y<= 1.2x +8 2. y> -2x +4 3. y> 2x +... (answered by jim_thompson5910)

1.y=x+3 2.y=2-x 3.y=3x-1 4.y=x/2 5.y=2x... (answered by tutorcecilia)

Solve the following systems of equations and state if any lines are parallel 1. y +... (answered by math-vortex)

please can help me Solve the following linear equations using the Elimination method... (answered by Theo)

Solve the following linear equations using the Elimination method and The Substitution... (answered by ikleyn)