SOLUTION: The cantlever ABC shown in Figure 1 is of uniform croos-section and is
subjected to a uniformly distributed load over one-hal of the span. Determine the
deflection of the canti
Algebra.Com
Question 1187862: The cantlever ABC shown in Figure 1 is of uniform croos-section and is
subjected to a uniformly distributed load over one-hal of the span. Determine the
deflection of the cantilever at C. [Ans.: 7wL4
/384EI]
Answer by ikleyn(52781) (Show Source): You can put this solution on YOUR website!
.
First, there is no any Figure in the post, and there is any link to an image.
Second, this problem is from Mechanical engineering,
so you better find another, adequate source / forum / site to ask your question there.
RELATED QUESTIONS
The cantlever ABC shown in Figure 1 is of uniform croos-section (answered by ikleyn)
A cantilever of uniform section is 3 m long. It is rigidly fixed at one end and
is... (answered by ikleyn)
In problems 11 and 12, use the fact that the load a beam with a rectangular cross section (answered by Mathtut)
The loading on a simply supported beam of uniform cross-section is shown in Figure 4. If... (answered by Solver92311)
The cable of a suspension bridge hangs in the form of a parabola when the load is... (answered by Alan3354,ankor@dixie-net.com)
In ΔABC shown below, point A is at (0, 0), point B is at (x2, 0), point C is at (x1,... (answered by greenestamps)
when the load is uniformly distributed horizontally, a suspension bridge cable hangs in a (answered by greenestamps)
When the load is uniformly distributed horizontally, the cable of a suspension bridge... (answered by lwsshak3)
Use the fact that the load a beam with a rectangular cross section can support is jointly (answered by greenestamps)